DMX Splitter is required for stable signal transmission
Specially for a DMX chain with more than 32 DMX units or a distance of 150 meters
It serves as a signal distributor and booster. DMX outputs, each equipped with 3 pin or 5 pin XLR connectors for compatibility in any DMX setup and 100% electrical isolation between all in/outputs. The booster function analyses the incoming DMX data and re-constructs it before boosting it allowing it to be pushed further down DMX lines without signal problems. With LED indicators for both signal and power, it is easy to detect error for individual channel
Ideal for fixed installation, mobile show, rental, etc
Technical Feature
1.32CH DMX512 constant voltage decoder
. The use of OLED screen and touch the key to form the interface of the adult computer, rich display content, simple and fast operation.
3. 8 bit (256 level) or 16 bit (65536 level) gray level is optional.
4. Three kinds of 3-pin XLR, green terminal and RJ45 with signal isolation function are provided, among which the green terminal also has the function of signal amplifier.
5. With RDM remote management protocol, through the RDM master control can browse and set parameters, modify the address of DMX, device identification and other operations.
6. Standard, linear, logarithmic and user-defined 0.1-9.9 passing curves are optional.
7. Data saving after power failure
Model DMX-R632
Input voltage DC5V~DC24V
Maximum load current 3A/CH×32,Maximum96A
Maximum output power 480W(5V)/1152W(12V)/2304W(24V)
Output Signal Grade 256(8 bit)/Grade 65536(16 bit)
Input Signal DMX512/RDM
Output Signal 32 channel constant voltage PWM
Output Frequency 1K.2K.4K.8K Optional
Decode channel 32 channels
DMX512 Socket type Standard xlr-3r Canon plug, RJ45 network cable socket, terminal block
Control Model Four modes switching: dimming / tinting temperature / RGB / RGBW
Product Size L195 X W145 X H38(mm)
Weight 810g
Up to CE standard, UL standard and GB7000.15-2000 standard
Audited Supplier 
){kind=link}