Stage Effect Light, CO2 Column Machine, CO2 Column Machine, CO2 Column jer machine, party light, DMX 512
Stage DMX Digital Fan
This is a digital stage fan, and the fan is a multifunctional stage fan,he has DMX-512,0-100% accurate speed, timing quantitative,wireless remote control Functions.With smoke,mist machines, paper machine,bubble machine,snow machine used in conjunction,can make the effect blown farther.it has a modern appearance, strong function, is your good assistant stage,
Technology parameters
Voltage; 110V-60 HZ / 220 V 50 HZ
Power; 350 W
Air volume; 125 M3 / MIN
Speed: 3200 times/min.
Control; DMX-512 / wireless remote control
Weight; 7.3 KG
Size; 58 X30X57CM
INSTRUCTIONS FOR USE:
Receiving this machine,open the package,the machine is installed,
the machine can be ground and hanging installation.Plug in the power,if you are using the DMX control,the DMX signal line is inserted into the fancanon,screen will display DMX001.According to your address code chosen,in the console on the first push rod is fan size,pushed upward side winds,pull down the side of the wind,if not DMX control,can use the built-in control box to complete the output volume.FUECTION is the function keys,press FUECTION,screen will appear CYCLE this is the timing of the output size,you can press the arrow keys to change its size,and by second,FUECTION this is the output of the timing of the time,you can press the arrow keys to change the time size,then press third FUECTION this is regular the output of the stop time,you can press the arrow keys to change the size of stop time,and by fourth,FUECTIONDOLD,HOLD this is the output air rate,you can press the arrow keys to change its size,then by fifth,FUECTIONDOLD,MANUAL this is the manual output size,you can press the arrow keys to change it to lose the size of the number,then press sixth FUECTIONDOLD,DMX512,this is DMX address code,you can press the arrow keys to change its address.
To use the timing and quantitative,first click the TIMER,fan will start you on the FUECTIONDOLD setting time and volume to run.Your FUECTIONDOLD changes its volume and running time,side it will change in CYCLE.
If the VOLUME key is pressed,the fan will immediately display,the 0-100%,if you change the 50% fan will be on you as you set 50% runs,10% side fan installed you set 10% runs.You can change his output,according to the arrow keys to change the size,volume or with you changed volume size.
According to the MANUAL side fan 100% air output,open up the handle side stop operation.
If not DMX and control box control,you can use wireless remote control,according to the first switch side starting,according to the second switch side stop operation.The remote is not regulated output volume size.
MATTERS NEEDING ATTENTIONIN:
1.the fan is strictly prohibited in the conductive dust,flammable and explosive,corrosive environment,the surroundings should have sufficient space range,to ensure its freedom swing.
2.when the fan using the power socket,socket should meet the requirements of national standard,the fixed power supply line should also mounted on the contact distance of at least 3 mm power an all-pole disconnection device,the power cord in the Yellow/Green dual color line shall be reliably grounded;if the supply cord or plug is damaged,to avoid the danger must,by the factory or repair or similar processional replacement.
3.the fan in mobile location,cleaning,repair,maintenance,should first turn off power supply circult,and separation.
4.the fan power cord should not in any way,and to prohibit and other objects are bound together,in order to avoid danger.
5.without changing any parts,not allowed to change any part of the installation state.
6.fan failure,should immediately disconnect the power,by a professional maintenance staff,returned to normal after continued use,is strictly prohibited in the failure continued after the use of electricity,in order to ensure the safety of.
REPAIR AND MAINTENANCE:
1.should regularly clean.Clean should disconnect the power supply,the fan stops,with a soft cloth and wipe clean agent(disable gasoline or other plating,paint a corrosive liquid),fan blades available cotton cleaning,avoid touch pressure fan.When cleaning,pay attention not to let the cleaning agent or penetration of water into the motor or other electrical components.
2.check the connection bolts,screws and other fasteners,fastener,such as a loose fastening should timely.
3.the unused fan without opening the package state,or do not use a long time fan(clean and packaging),should be stored in a well ventilated environment around,no corrosive gas.Long time disable to use,must check all connection component is connected reliably,and the electricity test operation to normal after normal use.
Audited Supplier 
){kind=link}